Meridian DSP7200.2 DSP Active Loudspeakers


View All Meridian




Superior performance

Adopting the same cabinet design and technology as Meridian’s flagship DSP8000, is the DSP7200.2. Designed to be flexible in its application, the DSP7200.2 is suitable for use in a wide range of environments, from small to relatively large rooms (20-50m2).


Utilising a custom midrange driver, along with a pair of eight-inch bass-drivers, the DSP7200.2 offers improved spatial resolution and pushes boundaries with the immense dynamics it produces. Its incredibly inert cabinet is fabricated from pressure-laminated panels, each using three layers of birch plywood around an aluminium core with a thick resin inner coating. The DSP7200.2 packs even more of a punch than the DSP5200.2 - An impressive sense of scale, lifelike detail, and low frequency authority are all guaranteed thanks to Meridian’s expert engineering.

Meridian’s latest DSP code ensures all audio signals, including MQA Core streams, are rendered at 88.2/96kHz regardless of the incoming sampling rate, maximising the potential of the loudspeaker’s DSP engine.

AUDIO INPUTS: Meridian SpeakerLink (RJ45) & RCA phono digital inputs accepting 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support

AUDIO OUTPUTS: Meridian SpeakerLink (RJ45) & RCA phono digital outputs delivering 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support

PERFORMANCE: Peak SPL: 118dB at 1m (music material). Noise less than 15dB SPL Frequency response in-room within 3dB: 30Hz to over 20kHz

AMPLIFIERS: 4 x 150w (600w) Overall distortion typically <0.02% at any frequency or level.

BASS DRIVERS: 2 x 200mm long-throw

MID DRIVER: 160mm polypropylene

TWEETER: 25mm (1”) aluminium composite-dome, silver wire voice-coil, dual magnet, semi-hornloaded

DSP FEATURES: FIFO memory buffer input for the lowest possible jitter from almost any source Linear-phase mid–top crossover; 6th-order Linkwitz-Riley bass–mid crossover Bass protection All upsampling and processing is performed by a 150MHz digital signal processor (DSP) Hybrid analogue/digital volume control Balance control with proportional delay compensation

DISPLAY: Eight-character display with additional status indicators; can be blanked during use

DIMENSIONS / WEIGHT: HEIGHT; 1072mm [42.2in] (Without feet/spikes) WIDTH: 178mm [7in] tapering to 350mm [13.8in] DEPTH: 220mm [8.7in] tapering to 422mm [16.6in] FOOTPRINT (W x D): 350mm [13.8in] x 422mm [16.6in] WEIGHT: 55kg [121lbs]

POWER: 20W standby; 600W max

Due to the bespoke nature of our high-end music systems this product is not available to be purchased online. Please contact us for personalized service from one of our team of experts.