Menu

Home Home entertainment Home automation Online Store News Shopping Cart

0

PureAudio Control Preamp + Reference MonoBlock Pair

$11,500.00

Free Delivery in NZ
for orders over $100 or $5 under $100.

Product Description

*Wellington Store Only* - Pure Audio Combo Deal!

Two Pure Audio Reference Class A MonoBlocks + Pure Audio Control Preamplifier!

Sounding neutral or slightly tube-like, and devoid of any solid
state signature, our Reference power amplifier is designed to
work with domestic loudspeakers in typical home environments.
The Class A Power rating is perfectly matched to this requirement
and limits the energy consumption and the heat generated during
operation in a true Class A design. The power rating also allows
us to include a fully regulated, high-current power supply (this is
a very rare inclusion) providing an optimum low impedance, low
noise environment, from which the amplifier can deliver its very
best.

We believe our Control preamplifier will stand comparison with
the very best available at any price. Our design is an exercise in
minimalism in the service of music. At it’s heart is a high precision
32 step attenuator utilising non-magnetic Vishay-Dale resistors
which provide fine control over the volume setting. Along with
the buffer that follows, there is essentially no impact on the signal
passing through. The result is pure. Just music, with nothing
added, and nothing taken away.

We created the Control preamplifier as a complete dual mono
design, with entirely separate left and right channel power
supplies, signal paths, and ground systems. The interior is kept
free of electronic noise, with no microprocessors, or other
noise polluting elements. This care and attention contributes
significantly to the purity of the music that you hear.


When partnered with our Reference Monoblock Class A Power
Amplifier the two products interconnect and interact seamlessly as
a system in response to your needs.


Specifications:


Reference Power Amplifier:
Power: 65 Watts continuous into 8 Ohms pure Class A
Frequency Response: Flat from 10Hz to 100kHz
Input Impedance: 100k Ohms
Distortion: Typically <0.01% under normal operation
Current Output: 30A peak
Hum & Noise: Inaudible
Gain: 28dB
Control Terminals: 12V trigger in and 12V trigger loop out
Power Consumption In use: 150 Watts
Power Consumption in Standby: 5 Watts
Dimensions: 410mm deep, 380mm wide, 115mm high
Weight: 16kg


Control Preamplifier:
Inputs: Four line inputs, 1 direct and 3 auto-selected, 1 processor
input, 12V or standby switched
Outputs: Two pairs of line outputs, 1 pair of record outputs
Control Terminals: 12V trigger in and out
Frequency Response: Flat from DC to greater than 100kHz
Input Impedance: 50k Ohms
Output Impedance: 100 Ohms
Distortion: <0.01% in normal operation
Hum & Noise: Inaudible
Power Consumption: 25 Watts
Dimensions: 410mm deep, 380mm wide, 115mm high
Weight: 12kg

Specifications

*Wellington Store Only* - Pure Audio Combo Deal!

Two Pure Audio Reference Class A MonoBlocks + Pure Audio Control Preamplifier!

Sounding neutral or slightly tube-like, and devoid of any solid
state signature, our Reference power amplifier is designed to
work with domestic loudspeakers in typical home environments.
The Class A Power rating is perfectly matched to this requirement
and limits the energy consumption and the heat generated during
operation in a true Class A design. The power rating also allows
us to include a fully regulated, high-current power supply (this is
a very rare inclusion) providing an optimum low impedance, low
noise environment, from which the amplifier can deliver its very
best.

We believe our Control preamplifier will stand comparison with
the very best available at any price. Our design is an exercise in
minimalism in the service of music. At it’s heart is a high precision
32 step attenuator utilising non-magnetic Vishay-Dale resistors
which provide fine control over the volume setting. Along with
the buffer that follows, there is essentially no impact on the signal
passing through. The result is pure. Just music, with nothing
added, and nothing taken away.

We created the Control preamplifier as a complete dual mono
design, with entirely separate left and right channel power
supplies, signal paths, and ground systems. The interior is kept
free of electronic noise, with no microprocessors, or other
noise polluting elements. This care and attention contributes
significantly to the purity of the music that you hear.


When partnered with our Reference Monoblock Class A Power
Amplifier the two products interconnect and interact seamlessly as
a system in response to your needs.


Specifications:


Reference Power Amplifier:
Power: 65 Watts continuous into 8 Ohms pure Class A
Frequency Response: Flat from 10Hz to 100kHz
Input Impedance: 100k Ohms
Distortion: Typically <0.01% under normal operation
Current Output: 30A peak
Hum & Noise: Inaudible
Gain: 28dB
Control Terminals: 12V trigger in and 12V trigger loop out
Power Consumption In use: 150 Watts
Power Consumption in Standby: 5 Watts
Dimensions: 410mm deep, 380mm wide, 115mm high
Weight: 16kg


Control Preamplifier:
Inputs: Four line inputs, 1 direct and 3 auto-selected, 1 processor
input, 12V or standby switched
Outputs: Two pairs of line outputs, 1 pair of record outputs
Control Terminals: 12V trigger in and out
Frequency Response: Flat from DC to greater than 100kHz
Input Impedance: 50k Ohms
Output Impedance: 100 Ohms
Distortion: <0.01% in normal operation
Hum & Noise: Inaudible
Power Consumption: 25 Watts
Dimensions: 410mm deep, 380mm wide, 115mm high
Weight: 12kg