Rotel A11 Tribute integrated Amplifier

$1,199.00

View All Rotel

In Stock, Available Now

Free Delivery Or Pickup
Interest free terms available
request a demonstration

Details

Specifications

TRIBUTE TO A LEGEND

The A11 Tribute is a Class AB 50W Integrated Amplifier developed in cooperation with the audio engineering legend Ken Ishiwata as a Tribute to his legacy. Upgraded components and meticulous tuning of all critical circuits deliver a richer, expressive, and true-to-life experience from the Bluetooth, RCA and Moving Magnet Phono Stage inputs.

Rotel-A11-Tribute-Integrated-amplifier

FEATURES

- Class AB 50 watts per channel stereo amplifier (8 Ohms)
- Moving Magnet Phono Stage Input
- 4 RCA analog inputs
- Bluetooth receiver (apt-X and ACC streaming)
- Dedicated RCA pre-output
- Dual A-B selectable speaker outputs
- RS232 and dual 12V trigger outputs
- Front panel display and IR Remote

The A11 Tribute is a Class AB 50W (8 ohms) Integrated Amplifier developed in cooperation with the audio engineering legend Ken Ishiwata as a Tribute to his legacy spanning over 40 years in the industry.

The collaboration between Ken and Rotel’s own engineering design teams delivered on the promise of an even higher level of performance of the extremely successful and popular award-winning A11. Upgraded components and meticulous tuning of all critical circuits deliver a richer, more expressive, and true-to-life experience from all of the support source inputs including apt-X and AAC wireless Bluetooth, array of 4 RCA analog inputs and a Moving Magnet Phono Stage for vinyl fans.

Specially selected improved components were chosen to offer higher performance throughout the signal path. In the amplifier stage, all 10 capacitors and two resistors in the signal path were changed.

For the pre-amp, six capacitors were upgraded, representing over 50% of the components in the signal path. All six capacitors in the volume stage were also upgraded.

Custom damping materials were added to the A11’s mechanical chassis to reduce ringing and further isolate/insulate and dampen any vibrations within the product.

The front panel graphic display and IR remote ensure effortless control of the audio driven by a Rotel in-house manufactured oversized toroidal transformer. The resulting acoustic performance speaks for itself under all loading conditions with even the most difficult speaker loads.

       

PERFORMANCE

• CONTINUOUS POWER OUTPUT: 50W/Ch (8Ω)
  TOTAL HARMONIC DISTORTION (THD)(20Hz–20kHz): <0.03%
 FREQUENCY RESPONSE: 
- Line Level Inputs: 10Hz - 100kHz ±0.5dB
- Phono Input: 20Hz - 20kHz ±0.5dB|
 S/N RATIO (IHF "A" Weighted): 
- Line Level Inputs: 100dB
- Phono Input: 85dB
 INTERMODULATION DISTORTION (60Hz:7kHz, 4:1): <0.03%
 DAMPING FACTOR: 140
 SPEAKER IMPEDANCE: 4Ω minimum
 INPUT SENSITIVITY: 
- Line Level Inputs: 180mV
- Phono Input (MM): 2.3mV
 INPUT IMPEDANCE: 
- Line Level Inputs: 47kΩ
- Phono Input (MM): 47kΩ
 INPUT OVERLOAD: 
- Line Level Inputs: 4V
- Phono Input: 50mV
 PREOUT LEVEL: 1V
 OUTPUT IMPEDANCE: 470Ω
 TONE CONTROLS: ±10dB at 100Hz / 10kHz

GENERAL

 DIMENSIONS (W × H × D): 430 × 93 × 345mm
 FRONT PANEL HEIGHT: 80mm
 POWER REQUIREMENTS: 230V, 50Hz
 POWER CONSUMPTION: 160W
 STANDBY POWER CONSUMPTION: <0.5W
 NET WEIGHT: 6.85kg 
 BTU RATING (4Ω, 1/8th power): 479 BTU/h