Display device – Size of effective display area = 0.61” x 3
Number of pixels – 24,883,200 (3840 x 2160 x 3) pixels
Projection lens
Focus – Manual
Zoom – Manual (Approx. x1.6)
Lens shift – Manual / Vertical: +71% Horizontal: +/-25%
Throw ratio – 1:38 : 1 to 2:21 : 1
Light source – Laser phosphor
Light output – 2,000 lm
Colour light output – 2,000 lm
Dynamic contrast – ∞:1
Displayable scanning frequency
Horizontal – 19 kHz to 72 kHz
Vertical – 48 Hz to 92 Hz
Accepted digital signals
720 x 576/50p, 720 x 480/60p, 1280 x 720/50p, 1280 x 720/60p, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/24p, 1920 x 1080/50p, 1920 x 1080/60p, 1920 x 1080/120p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p
INPUT OUTPUT (Computer / Video / Control)
HDMI x 2
Trigger
Minijack, DC 12 V Max. 100 mA
Remote
RS-232C, D-sub 9-pin (male)
LAN
RJ45, 10Base-T/100BASE-TX
IR IN
Mini Jack
USB
DC 5 V, Max. 500 mA
Picture processor
X1 for projector
Acoustic noise
24 dB *2
Operating temperature / Operating humidity
5°C to 35°C (41°F to 95°F) / 35% to 85% (no condensation)
Storage temperature / Storage humidity
-20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)
Power requirements
AC 100 V to 240 V, 4.3 A to 1.8 A, 50/60Hz
Power consumption
295 W
Standby
0.3 W (when “Remote Start” is set to “Off”)
Networked Standby
0.5W (LAN) (when “Remote Start” is set to “On”)
When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W).
Standby Mode / Networked Standby Mode Activated
After about 10 Minutes
Dimensions (W x H x D) (without protrusions)
460 x 200 x 472 mm
Mass
Approx. 13 kg